Micro Solder Cup Connectors

METAL SHELL of Micro Solder Cup Connectors

• Metal shell recommended for environmental and EMI applications.

• Ideal for prototyping or where pigtail type connectors cannot be used.

PLASTIC SHELL of Micro Solder Cup Connectors

• Ideal for prototyping or where pigtail type connectors cannot be used.

• Plastic connector and solder cup contacts.

• Ideal for prototyping or where pigtail type connectors cannot be used.

• Operating temperature: 150°C or 200°C.

• 9 to 51 contacts.

Contact arrangements of Micro Solder Cup Connectors

• Metal shell: 9, 15, 21,25,31,37,51,66,74, 100 contacts

• Plastic shell: 9, 15, 21,25,31,37, 51 contacts

Introduction of Micro Solder Cup Connectors

• Series: Micro D Connector

• Terminal Mounting: Solder Cup type

Contacts: Twist solder cup terminal PIN contacts, high-density interconnection, Beryllium  copper (BeCu), gold over nickel plating
The thickness of Gold plating: ≥1.27micron
TWIST solder cup terminal PIN: Male contact, fitted to plug connector.
Socket: Female contact, fitted to socket connector (also known as a socket).
Insulator: 20% GFPPS (20% glass-filled polyphenylene sulfide)
LCP: Liquid Crystal Polymer.
Potting: Epoxy compound used as an encapsulant
Insert: Moulded insulation housing, separating each connection.
Interfacial Seal: Fitted to socket connector only
Shell: Connector metal body plated nickel or cadmium.
Jackscrew: High or low profile, hexagonal socket or slotted head.
Jackpot: Mates with a jackscrew.

Standard connector: Manufactured to the standard dimensions and specifications.
Special connector: A standard connector modified to meet specific requirements.
Custom made connector: Designed to meet specific customer requirements.
Solder cup connector: Connector with solder type contacts, usually used for prototyping.